Fuma E-Cigarette Operation Guide
Using Fuma electronic cigarettes correctly ensures optimal performance and satisfaction. Follow these steps for effective operation.
Device Setup
Initial Preparation: Remove device and components from packaging. Identify components:
- Device body (battery/mod)
- Pods/cartridges
- USB-C charging cable (if applicable)
Charging Procedure
Connect USB-C cable to device port and power source. Charging indicator illuminates. A solid light indicates completion. Ensure full charge before initial use (approx. 60 minutes).
Pod Installation
Align Fuma pod contacts with device terminals. Insert firmly until magnetic click is audible. Ensure proper seal to prevent leakage. Avoid force.
Priming the Coil
Mandatory Step: After inserting a new pod, wait 5-10 minutes for e-liquid saturation. Prevents dry hits and coil burnout.
Device Activation
Select operation mode based on model:
- Draw-activated: Inhale directly from mouthpiece.
- Button-activated: Press fire button while inhaling. 5-click rapidly to power ON/OFF.
Indicator light confirms activation during use.
Adjusting Airflow (If Applicable)
Rotate airflow ring to modify resistance. Smaller opening increases tightness; larger enhances airiness.
Monitoring E-Liquid
Regularly check pod liquid level through transparent window. Avoid vaping below minimum fill line. Replace pod when empty.
Pod Replacement
Remove exhausted pod by pulling directly upward. Insert new pod after priming.
Troubleshooting Tips
- No Vapor: Confirm battery charge, pod insertion, and ON state.
- Reduced Flavor/Burnt Taste: Replace pod. Ensure sufficient liquid.
- Leaking: Check pod seals and upright storage.
Safety & Maintenance
Store device at room temperature. Clean battery contact points monthly with dry cotton swab. Never charge unattended overnight. Avoid exposure to extreme heat or moisture.
Fuma products contain nicotine. Adult consumers only.
