Here’s how to safely use your Haka electronic cigarette following five essential steps:
Step 1: Charge the Device Fully
Locate the USB charging port. Connect the provided charging cable to a standard 5V USB power adapter (not included) or computer USB port.
- Device lights usually indicate charging (e.g., flashing or specific color).
- Disconnect once fully charged (light often turns steady or off).
- Avoid overcharging or using damaged cables/adapters.
Step 2: Prime the Coil
Critical: Before first use or installing a new pod/cartridge:
- Remove the pod/cartridge from the battery.
- Apply 3-5 drops of e-liquid directly onto the cotton wicking ports visible on the coil.
- Reinstall the pod/cartridge and let it sit upright for 5-10 minutes.
Step 3: Power On/Off & Activate
- Power: Most Haka devices turn on/off by pressing the fire button 5 times rapidly. Check for LED confirmation.
- Firing: With the device powered on, simply press and hold the fire button while inhaling from the mouthpiece.
- Auto-Draw (if applicable): Some models activate by inhaling. Start with a gentle, steady draw.
Step 4: Inhale Properly
- Place lips firmly around the mouthpiece.
- Press the fire button (if required) a split second before starting your inhale.
- Take a slow, gentle, direct-to-lung (DTL) or mouth-to-lung (MTL) puff, depending on the device’s design. Avoid hard, forceful drags.
- Release the fire button at the end of the inhale.
Step 5: Refill & Maintain
- Refill: Power off the device. Remove the pod/cartridge. Open the fill port (typically silicone plug or valve) and add e-liquid carefully. Avoid overfilling and ensure the coil’s wicking ports are covered by e-liquid. Close the fill port securely before reattaching.
- Maintenance: Wipe away any e-liquid spills from contacts or the battery top regularly. Replace pods/cartridges when flavor diminishes or tastes burnt.
